Whether you are traveling somewhere or staying in your home, your RV is going to need power, a safety valve, and electricity, and for this reason, we have here a guide on How to Wire a 30-Amp RV Outlet safely without any help. It is considered the best practice to simply keep the RV charged up because it will have a positive effect on the health of the battery.

In case you have a good RV Outlet, you will have on-hand air conditioning, and all the appliances like refrigerators, tools, and equipment will be running exceptionally for a longer time. Here we will discuss the RV wiring in an efficient and safe way for you to do everything effortlessly. So, without any further delay, let us hop into the article.

Table Of Contents

Things Required To Install a 30-Amp RV Outlet at Home

There are certain requirements that you have to possess for wiring a 30-Amp RV. Here we have a list of essentials you will have to acquire;

  • Safety Electrical Box
  • Breaker for Electrical Panel
  • Outlet Cover Plate
  • 10 Gauge wire for 30-Amp
  • 25 feet staples for installation of 10-gauge wire.

Here, it is important to note that when getting equipment for the whole process, you need to have elements of the breaker which are designed for the panel and are according to the 30-Amp Safety Valve. Usually, the breaker will consist of one handle and one spot. (Holbrook, n.d.)

How to Wire a 30-Amp RV Outlet

So, the materials required are taken into consideration, and now it’s time to talk about How to wire a 30-Amp RV Outlet. First of all, you need to install the lines between the new outlet and the breaker. Passing enough lines through the panel you don’t have to open the panel, do all the steps mentioned and then open the panel.

Steps

  • Using a craft knife, trim the jacket cords cover with an inch gap. This will separate the thee wires but keep in mind, that you have to be extra careful doing the process because it can damage the insulation cover.
  • Using a stripper, you have to remove around half an inch of insulation cover from these three lines.
  • Unscrewing the TT-30P fasteners, you have to draw brass pins from the housing.
  • Now, this is the most important point to consider in Wire a 30-Amp RV Outlet because you have to match wires according to their color codes. The Black one is the hotline which should be attached to the screw brass color. Attack the Neutral line in the Screw of Silver Color and finally, the green line is to be attached to the screw of green color, which is ground. In some cases, if you can’t find the green color screw, you should attach the ground line to the pin of the U-Shape.
  • Finally, tighten the straps on the Jacket Cover of the Cord and then secure them inside the RV plug. (Holbrook, n.d.)

Considerable Things

Learning about how to install a 30-amp RV outlet at home, you need to keep a few considerable things in mind like types, location, and so on. Here we will discuss these considerable things;

Types of RV Electrical System

Types of RV Electrical System

Primarily, there are two types referred to as a 12-volt DC direct current electrical system and the Alternating Current System. Batteries are powering the 12-volt system, then systems power heaters, lights, and furnaces in the RV living area or things consuming energy. The generator or RV hookup plug charges the 120-volt system and supplies power to the appliances.

Outlet Availability

It is essential to know about the basic types of plugs. Here you will get to know about the three basic types;

  • Regular Household Outlets; these are regular home sockets and supply power to pickup campers or small tent trailers.
  • 30-Amp; these are a bit more efficient and supply power to large tent trailers, RVs, and motorhomes of a small area.
  • 50-Amp; these are the most efficient amongst the 3 and are meant for larger trailers, fifth wheels, and motorhomes.

Location

As the forces of nature are not predictable, location choice is amongst a few things to consider. Depending on the parking of the RV, you will have to put lines inside the walls. In some cases, the surface mounting method is used for the installation of the panel. But in this case, you need to cover the plugs while electricity is running through the RV.

In case the plugs are not reaching the electric box, the Power cord extensions should be available. Use a gauge to keep the current of RV but keep in mind that the typical cords won’t ever be enough for RV’s use. If the line you are using is inefficient or has a smaller rating, it will damage the RV electrical system. (Holbrook, n.d.)

Conclusion

Wiring a 30-Amp RV outlet is not that hard if you have proper knowledge and tools by your side. Knowing how to Wire a 30-Amp RV Outlet is a skill you need to have when owning an RV but jumping to the electrical equipment, safety is always considered the top priority. For this specific reason, we compiled this article to help you out in your RV journey.